IN1PREV=LOW, IN0PREV=LOW, FLSTOPIEN=DISABLED, CMP1I=NOT_SET, DIRF=COUNTER_CLOCKWISE, STATE=ST0, CMP1OUT=LOW, IN1=LOW, IN0=LOW, QERRI=NOT_SET, DIRCHGI=NOT_SET, TRANSI=NOT_SET, CMP1IEN=DISABLED, FLSTARTIEN=DISABLED, FLF=NOT_SET, TRANSIEN=DISABLED, QERRIEN=DISABLED, CMP0IEN=DISABLED, OVFIEN=DISABLED, FLSTARTI=NOT_SET, FLSTOPI=NOT_SET, DIRCHGIEN=DISABLED, CMP0I=NOT_SET, CMP0OUT=LOW, OVFI=NOT_SET
Pulse Counter Status
| DIRCHGI | Direction Change Interrupt Flag. 0 (NOT_SET): A direction change did not occur. 1 (SET): A direction change occurred. |
| OVFI | Counter Overflow Interrupt Flag. 0 (NOT_SET): Neither of the counters overflowed. 1 (SET): One of the counters overflowed. |
| CMP0I | Digital Comparator 0 Interrupt Flag. 0 (NOT_SET): A digital comparator 0 and counter 0 match did not occur. 1 (SET): A digital comparator 0 and counter 0 match occurred. |
| CMP1I | Digital Comparator 1 Interrupt Flag. 0 (NOT_SET): A digital comparator 1 and counter 1 match did not occur. 1 (SET): A digital comparator 1 and counter 1 match occurred. |
| TRANSI | Integrator Transition Interrupt Flag. 0 (NOT_SET): An integrator output transition did not occur. 1 (SET): An integrator output transition occurred. |
| QERRI | Quadrature Error Interrupt Flag. 0 (NOT_SET): A quadrature error did not occur. 1 (SET): A quadrature error occurred. |
| FLSTOPI | Flutter Stop Interrupt Flag. 0 (NOT_SET): A flutter detection end event did not occur. 1 (SET): A flutter detection end event occurred. |
| FLSTARTI | Flutter Start Interrupt Flag. 0 (NOT_SET): A flutter detection start event did not occur. 1 (SET): A flutter detection start event occurred. |
| DIRCHGIEN | Direction Change Interrupt Enable. 0 (DISABLED): Disable direction change as an interrupt or wake up source. 1 (ENABLED): Enable direction change as an interrupt or wake up source. |
| OVFIEN | Counter Overflow Interrupt Enable. 0 (DISABLED): Disable counter overflows as an interrupt or wake up source. 1 (ENABLED): Enable counter overflows as an interrupt or wake up source. |
| CMP0IEN | Digital Comparator 0 Interrupt Enable. 0 (DISABLED): Disable comparator 0 as an interrupt or wake up source. 1 (ENABLED): Enable comparator 0 as an interrupt or wake up source. |
| CMP1IEN | Digital Comparator 1 Interrupt Enable. 0 (DISABLED): Disable comparator 1 as an interrupt or wake up source. 1 (ENABLED): Enable comparator 1 as an interrupt or wake up source. |
| TRANSIEN | Integrator Transition Interrupt Enable. 0 (DISABLED): Disable integrator transitions as an interrupt or wake up source. 1 (ENABLED): Enable integrator transitions as an interrupt or wake up source. |
| QERRIEN | Quadrature Error Interrupt Enable. 0 (DISABLED): Disable quadrature error as an interrupt or wake up source. 1 (ENABLED): Enable quadrature error as an interrupt or wake up source. |
| FLSTOPIEN | Flutter Stop Interrupt Enable. 0 (DISABLED): Disable flutter detection end events as an interrupt or wake up source. 1 (ENABLED): Enable flutter detection end events as an interrupt or wake up source. |
| FLSTARTIEN | Flutter Start Interrupt Enable. 0 (DISABLED): Disable flutter detection start events as an interrupt or wake up source. 1 (ENABLED): Enable flutter detection start events as an interrupt or wake up source. |
| IN0 | Integrator 0 Output. 0 (LOW): The integrator 0 output is low. 1 (HIGH): The integrator 0 output is high. |
| IN1 | Integrator 1 Output. 0 (LOW): The integrator 1 output is low. 1 (HIGH): The integrator 1 output is high. |
| IN0PREV | Previous Integrator 0 Output. 0 (LOW): The previous integrator 0 output was low. 1 (HIGH): The previous integrator 0 output was high. |
| IN1PREV | Previous Integrator 1 Output. 0 (LOW): The previous integrator 1 output was low. 1 (HIGH): The previous integrator 1 output was high. |
| STATE | Pulse Counter State. 0 (ST0): The pulse counter is in state 0. 1 (ST1): The pulse counter is in state 1. 2 (ST2): The pulse counter is in state 2. 3 (ST3): The pulse counter is in state 3. |
| DIRF | Direction Flag. 0 (COUNTER_CLOCKWISE): The current direction is counter-clockwise. 1 (CLOCKWISE): The current direction is clockwise. |
| FLF | Flutter Detected Flag. 0 (NOT_SET): The switch operates normally. 1 (SET): A flutter event was detected. |
| DIRHIST | Direction History . |
| CMP0OUT | Comparator 0 Output. 0 (LOW): The output of comparator 0 is low. 1 (HIGH): The output of comparator 0 is high. |
| CMP1OUT | Comparator 1 Output. 0 (LOW): The output of comparator 1 is low. 1 (HIGH): The output of comparator1 is high. |